|
| | |
|
Product Specifications
Product Specifications
All 200 denier flag fabrics are manufactured in the USA from 100% domestic materials and are ideally suited for various applications: Cut and Sew, Screen Printing and Applique |
Nylon Fabric - 200 Denier - Standard Nylon Specifications:
DuPont Bright 6.6, 200 x 200 denier nylon with UV finish. Width: 60 inch. Full roll length: 125 yards, Firm flag finish. Resists fading - UV inhibitor in all colors.
Uses: flags, banners, fabric signs, curtains, backdrops and windsocks.
Weight: 3.1 oz/sq. yd.
This is the most widely used flag fabric in the U.S. today. The fabric is known for its lustrous colors, excellent durability, and light weight for fly-ability.
The fabric is specially prepared for outdoor flag use.
Available Colors: With a few exceptions, most colors are available as shown on the swatch chart. Colors no longer available are: bright blue and spring green.
Purchase minimums: Some colors require a purchase minimum which may be 5 yards or 15 yards. This has to do with minimum release requirements of the mill. Sometimes we are in a position to waive the minimum requirement for a specific color due to in-house stock availability. If you are looking for a color that is not commonly used (primary colors), we suggest you inquire about any minimum quantity requirements. We will always do our best to work with you to your advantage. |
|
|
|
400 Denier Nylon
Specifications: DuPont Type 6.6. Bright 400 x 400 Nylon with UV finish,.Weight: 5.6 oz./sq. yd. Width: 60" inch. Average roll length: 100 yds. Firm flag finish with UV inhibitors - resists fading. Uses: Heavy duty flags, banners, fabric signs, curtains, fabric filters, etc.
Made in the USA. Denier Bright Nylon type 6-6, yarn. For use as a heavy duty banner cloth where conditions dictate a stronger fabric. Needs higher wind for flag use.
reen, Royal Blue, FM Yellow, Spanish Yellow, Black, White, O
Available Colors. A limited number of colors are available: Inquire for current list
|
Polyester - Dacron - 200 Denier and 600 Denier
These are the fabrics we prefer to use ourselves when making dye-printed flags and banners in-house using the dye-sublimation method. The fabric is both durable and flexible, and when printed with high quality dye-sublimation ink results in excellent dye penetration of the fiber.
Style 8760 Flag Dacron, 3.2oz/sqyd 200 Denier Dacron (aka. Polyester) Available Slit to 60" or 72" style 8760 For dye-sublimation. Shrinks slightly at extreme temps used for dye-sublimation.
Polyester - Dacron - 600 Denier: Style 8763 Banner Dacron, 7.8oz/sqyd 600 Denier Dacron (aka. Polyester) Available Slit to 60" style 8763 This polyester fabric is used for dye-sublimation.
Special Select Poly. Non-wowen:
Polyester special heavy fabric for Pigmented ink printing. The fabric can be hemmed or scissor cut. This ideal for banners, sashes, armbands available in 24" width and 36" maximum width x length. This result in a less expensive hoigh quality product than dye prin using dye-sublimation ink and dye sub methods.
|
| |
| | |
|
CONTACT US:
Phone:845-246-7700
Email: [email protected]
|
|